Honeywell M7294Q1015/U Modutrol actuator

Honeywell M7294Q1015/B actuators, equipped with or without spring return, are designed for efficient control of flaps and valves in a variety of systems. These devices provide precise positioning of the flap or valve, ranging from fully open to fully closed position.

An electronic controller is used to achieve high accuracy and efficiency in position control. This controller transmits a signal to the motor in the form of current or voltage, thereby providing precision control over the position of the flap or valve.

This control method is widely used in heating, ventilation, air conditioning and other areas where it is necessary to regulate the flow of air or liquid. Honeywell M7294 Q 1015/B servomotors provide reliable operation and optimal performance in various operating conditions.

Specifications

• The motor and electrical circuits operate from a voltage of 24 VAC. Models are provided with a transformer installed by the manufacturer or with the possibility of installing a built-in transformer at the place of application.

• Quick-release terminals as standard, with an adapter provided for threaded terminals, provide ease of installation.

• An adapter bracket is provided to adapt the height of the shaft position in accordance with the requirements for old engines.

• In most engines, the stroke can be adjusted at the installation site (from 90° to 160°), providing flexibility in application.

• Cast aluminum housing provides durability and reliability in various operating conditions.

• Honeywell M7294 Q 1015/U servos are designed to effectively replace the M734H, J; M744S, T, Y; M745L, S, T, Y motors, providing a modern and reliable solution.

• The built-in return spring automatically returns the motor shaft to its normal position when the power is turned off, ensuring reliability and safety.

• The integrated junction box provides protection against external influences according to the NEMA 3 class, which makes these servos resistant to various atmospheric conditions.

• Built-in auxiliary switches can be installed by the manufacturer or added at the place of application, providing additional control options.

• The nominal standard full stroke time is 30 seconds (90° stroke) and 60 seconds (160° stroke), while models with a different full stroke time are available.

• Spring return motors can be used to move the rods of normally open or normally closed valves from the drive and auxiliary shaft ends.

• All models are equipped with shafts with two working ends (with a groove and an internal thread at both ends), which ensures versatility in installation.

• All models are also equipped with cams for auxiliary switches, providing additional control options.

• Constant torque is provided over the entire voltage range.

• The engines are designed for use with both normally open and normally closed valves and flaps, providing versatility in application.

Specifications

Input range: Current, unregulated: 4 – 20 mA, nominal; 25 mA, maximum. Current, adjustable: 4 – 20 mA, adjustable; 50 mA, maximum.

Zero (motor in closed position): 0.0 – 18 mA.

Range: 1.8 – 20 mA.

Voltage, unregulated: 2 – 10 In the post. current.

Stroke: In most models, the stroke can be adjusted from 90° to 160° at the engine installation site. Stroke adjustment is carried out using potentiometers located in the wiring compartment.

Full stroke time: Nominal 30 seconds (90° stroke) and 60 seconds (160° stroke).

Static shaft load: 200 lbs (91 kg) at the drive or auxiliary end of the motor shaft; maximum full load 300 lbs (136 kg).

Nominal ambient temperature: -40… +150°F (-40… +66°C). Shaft: 3/8 inch (9.5mm) square.

Gear drive: 3600

Engine speed: 810

Running time: 90

Number of moves: 58361

Number of steps: 364.76

Speed: 912

Torque: 450

Accessories

220736A – A set of internal auxiliary switches; one switch. Can be added at the installation site.

220736B – A set of internal auxiliary switches; two switches, for TRADELINE models, can be added at the installation site.

220738A is an adapter bracket that raises the motor shaft by 3/4 inch (19 mm) so that the motor can be used instead of previous Modutrol models.

220741A – Threaded terminal adapter turns standard quick-release terminals into threaded terminals.

221455A is a smoothly adjustable crank link that can rotate through the lower position without touching the engine base without installing an adapter bracket.

4074ERU is a NEMA 3 environmental protection kit for Modutrol IV engines mounted in any position except vertical.

50017460-001 – Built-in transformer; 24/120/230 VAC 50/60 Hz on the primary winding, 24 VAC on the secondary winding, quick-release terminals.

50017460-003 – Built-in transformer; 120 V AC 50/60 Hz on the primary winding, 24 V AC on the secondary winding, quick-release terminals.

221455ADW is a crank link that can rotate through the lower position without touching the engine base without installing an adapter bracket.

Q100 – Traction unit for connecting the Modutrol engine to the throttle valve V51. Requires a 220738A adapter bracket.

Q181 is an auxiliary potentiometer for serial or parallel control of additional modulating motors (series 90) in the number from 1 to 4.

Q209E,F – Manual potentiometer for Modutrol engines Q5001 – Adapter bracket and valve thrust assembly assembly for connecting the Modutrol IV engine to a water or steam valve.

Q607 is an external auxiliary switch, which is used to control auxiliary equipment by a signal of the position of the motor shaft.

ES650-117 is an explosion–proof housing for installing the engine in an explosive atmosphere. Not applicable with Q5001 (or with other valve thrust assemblies).