Kromschroeder IC40A2A (88300088) actuator

Kromschroeder IC 40A2A 88300088 actuator is a high-precision rotary motion device that excels in providing accurate control across a wide range of applications. With its ability to rotate from 0° to 90°, it is particularly suited for regulating gas and air volume in various equipment and flue gas systems. When paired with a control component, Kromschroeder IC 40A2A 88300088 actuator facilitates smooth and precise adjustments, making it an ideal choice for industries that require precise control over gas and air flow.

One of the key benefits of Kromschroder IC 40A2A 88300088 servo motor is its ease of configuration and activation, which is streamlined through the use of BCSoft programming software. This software allows for quick and easy setup, ensuring that Kromschroeder IC 40A2A 88300088 servomotor is optimized for its specific application.

In addition to its standalone capabilities, Krom schroder IC 40A2A 88300088 actuator can be paired with various valves and control systems to achieve even more precise control ratios. For example, when teamed with the butterfly valve BV.. (IB..), the IC 40A2A actuator can achieve control ratios of up to 10:1, making it ideal for regulating gas, cold air, hot air, and flue gas. This level of precision is particularly important in applications where small changes in flow rate can have a significant impact on overall system performance.

Similarly, when paired with the linear flow control VFC (IFC), Kromschroder IC 40A2A 88300088 servmotor can deliver precise control ratios of up to 25:1, ensuring accurate regulation of gas and cold air. This level of precision is critical in applications where small changes in flow rate can have a significant impact on overall system performance and efficiency.

Kromschroeder 88300088 IC 40A2A servomotor technical data

• Series 40, programmable via an optical interface
• Torque: 2 Nm
• 4 – 20 mA analogue input and digital inputs
• Parameter set 68001, operating mode 06, 3-stage operation with one or two digital inputs, running time: 6 s
• Weight: 2 kg
• Mains voltage: 100 – 230 V AC, ±10%, 50/60 Hz, the actuator automatically adjusts to the respective mains voltage
• Switch-on peak current: max. 8 A for max. 10 ms
• Screw terminals using the elevator principles for cables up to 4 mm2 (single core cables) and for cables up to 2.5 mm2 with wire end ferrules
• Angle of rotation: 0 – 90°, setting accuracy < 0.05°
• Holding torque = torque as long as mains voltage is applied
• 2 digital inputs: 24 V DC or 100 – 230 V AC each
• Current requirement of digital inputs: 3 mA ± 1.5 mA
• 1 analogue input (optional): 4 – 20 mA (internal load impedance: max. 500 Ω at 20 mA)
• Potentiometer (optional): 1 kΩ ± 20%, linearity tolerance: ± 2%, max. capacity: 0.25 W, conductive plastic element
• 2 digital outputs: Signaling contacts designed as relay change-over contacts
• Contact current of digital outputs: min. 5 mA (resistive) and max. 2 A
• The relay contacts can be connected to 100 – 230 V AC or 24 V DC
• If the contacts have been connected with a voltage > 24 V and a current > 0.1 A once, the gold plating on the contacts will have been burnt through. This contact can then only be connected with this power rating or higher power rating
• Enclosure: IP 65
• Safety class: I
• Duty cycle: 100%
• Electrical connection: Line entrance: 3 x M20 plastic cable glands
• Ambient temperature: -20 to +60°C, no condensation permitted
• Storage temperature: -20 to +40°C