Kromschroeder IC40A2D (88300085) actuator

Kromschroder IC 40A2D 88300085 actuator is specifically engineered for precise and controlled rotary movement spanning from 0° to 90°, catering to a wide array of applications. Paired with the control element, it facilitates the adjustment of gas and air volumes across diverse appliances and flue gas lines. Configuration and activation of Krom schroder IC 40A2D 88300085 servo motor are accomplished through the utilization of BCSoft programming software.

Moreover, Kromschroeder IC 40A2D 88300085 servomotor, when coupled with the butterfly valve BV.. (IB..), is optimized for achieving control ratios of up to 10:1, suitable for regulating gas, cold air, hot air, and flue gas.

Similarly, Kromschroder IC 40A2D 88300085 servo motor, when combined with the linear flow control VFC (IFC), is tailored to deliver control ratios of up to 25:1, ensuring precise regulation of gas and cold air.

Kromschroeder 88300085 IC 40A2D actuator technical data

• Series 40, programmable via an optical interface
• Torque: 2 Nm
• Digital inputs
• Parameter set 68001, operating mode 06, 3-stage operation with one or two digital inputs, running time: 6 s
• Weight: 2 kg
• Mains voltage: 100 – 230 V AC, ±10%, 50/60 Hz, the actuator automatically adjusts to the respective mains voltage
• Switch-on peak current: max. 8 A for max. 10 ms
• Screw terminals using the elevator principles for cables up to 4 mm2 (single core cables) and for cables up to 2.5 mm2 with wire end ferrules
• Angle of rotation: 0 – 90°, setting accuracy < 0.05°
• Holding torque = torque as long as mains voltage is applied
• 2 digital inputs: 24 V DC or 100 – 230 V AC each
• Current requirement of digital inputs: 3 mA ± 1.5 mA
• 1 analogue input (optional): 4 – 20 mA (internal load impedance: max. 500 Ω at 20 mA)
• Potentiometer (optional): 1 kΩ ± 20%, linearity tolerance: ± 2%, max. capacity: 0.25 W, conductive plastic element
• 2 digital outputs: Signaling contacts designed as relay change-over contacts
• Contact current of digital outputs: min. 5 mA (resistive) and max. 2 A
• The relay contacts can be connected to 100 – 230 V AC or 24 V DC
• If the contacts have been connected with a voltage > 24 V and a current > 0.1 A once, the gold plating on the contacts will have been burnt through. This contact can then only be connected with this power rating or higher power rating
• Enclosure: IP 65
• Safety class: I
• Duty cycle: 100%
• Electrical connection: Line entrance: 3 x M20 plastic cable glands
• Ambient temperature: -20 to +60°C, no condensation permitted
• Storage temperature: -20 to +40°C

Krom schroder IC 40A2D 88300085 servomotor certification

• 2014/35/EU
• 2014/30/EU
• DIN EN 60730