Kromschroeder DG10H-3 (84447600) gas pressure switch

DG10H-3 84447600 Krom schroder gas pressure switch designed to monitor the increase or decrease in gas or air pressure. Krom schroder DG10H-3 84447600 pressure switches provide effective monitoring of pressure changes in systems.

Kromschroder 84447600 DG10H-3 differential pressure switch maintenance

To ensure reliable operation of Kromschroeder DG10H-3 84447600 pressure switch, the following is recommended:

Periodically check the tightness and functionality of Kromschroeder DG10H-3 84447600. When used with biogas, it is recommended to reduce the inspection interval to six months. Perform a check of the functionality of the pressure switch during the pressure drop control using the PIA check valve. After carrying out maintenance, be sure to check the pressure switch of Krom schroder DG10H-3 84447600 for tightness.

Krom schroder 84447600 DG10H-3 gas pressure switch technical data

• Adjusting range: 1-10 mbar
• Gas type: natural gas, town gas, LPG (gaseous), flue gas, biogas (max. 0.1 %-by-vol. H2S) and air
• Switches and locks off with rising pressure
• Electrical connection via screw terminals and M16 cable gland, IP 54
• Maximum medium and ambient temperatures: -15 to +60°C
• Storage temperature: -20 to +40°C
• Long-term use in the upper ambient temperature range accelerates the ageing of the elastomer materials and reduces the service life
• Diaphragm pressure switch, silicone-free
• Diaphragm: NBR
• Housing: glass fibre reinforced PBT plastic with low gas release
• Lower housing section: AlSi 12
• Enclosure: IP 54 or IP 65
• Safety class: 1
• Line diameter: 0.5 to 1.8 mm (AWG 24 to AWG 13)
• Line entrance: M16 x 1.5, clamping range: diameters of 4 to 10 mm
• Type of connection: screw terminals
• Weight: 0,321 kg

Kromschroder DG10H-3 84447600 gas pressure switch designed lifetime

The service life of Kromschroder DG10H-3 84447600 pressure sensor, as indicated in the operating manual, depends on its use in accordance with this manual. After this period, it may be necessary to replace devices important for safety, according to EN 13611 and EN 1854 standards.

Kromschroeder DG10H-3 84447600 pressure switch certification

Kromschroder 84447600 DG10H-3 differential pressure switch with product ID No. CE-0085AP0467 complies with the requirements of the listed Directives and Standards.

Directives: 2009/142/EC – GAD, 2014/35/EU – LVD

Regulation: (EU) 2016/426 – GAR

Standards: EN 13611:2015+AC:2016, EN 1854:2010

Kromschroder DG10H-3 84447600 pressure switch corresponds to the tested type sample. The production is subject to the surveillance procedure pursuant to Directive 2009/142/EC Annex II paragraph and to Regulation (EU) 2016/426 Annex III paragraph 3.