Honeywell S4962CM1004 gas boiler control unit

The innovative system of joint regulation and ignition (CVI), created to optimize the operation of gas boilers, heaters and water heaters with an automatic ignition system, is based on the use of burner control units Honeywell S4962CM1004V04U. They cooperate with VK41 series gas regulators…, which ensures a high level of reliability and safety, even in critical situations.

Important features of the Resideo S4962CM 1004V04U control and ignition unit include:

1. Safe Ignition: The CVI system guarantees reliable ignition and effective flame control on the main burner of the heating equipment, which significantly reduces the risk of fire and emergency situations.

2. Flexible Settings: CVI allows you to configure the ignition process, as well as control the flame and adjust the gas flow for both the main and pilot burners, ensuring optimal efficiency and stability of the equipment.

These controllers of the Honeywell S4962 CM 1004V04U burner controller with a voltage of 220/240 V~ can be easily connected to the electrical circuit of the VK41 series gas regulator…, although they themselves do not directly affect the flame. They have outstanding characteristics and high reliability, and are also available in various modifications corresponding to various ignition systems.

General Specification

• Mains voltage 230V +10 -25%  

• Network frequency 50 +/-2 Hz                             

• Power consumption 8 VA                                       

• External outputs 230 V, maximum 3 outputs; 230 V 0.8 A each; total 2 A   

• Valve output 230 V AC 50 mA; modulating or on/off.   

• Ambient temperature -20..60°C                          

• Humidity not more than 90% at a temperature of 40 °C           

• Flame detection phase-phase               

• Electromagnetic filter included                            

• Blocking in the absence of air detection is enabled, if applicable   

• Non-volatile blocking

Connection

• Multi-edge connector

• High voltage spark and ground 2.8 x 0.5mm blade terminal

• Flame extinguishing rod 4.8 x 0.5 mm with blade terminal

• Ground terminal 6.3 x 0.8 mm blade terminal

General characteristics

1. Integrated Protection: All burner control protection functions are integrated into a reliable system, ensuring safety in the operation of gas heating devices.

2. Optimal Solutions: Special attention is paid to the development of optimal solutions for systems with spark ignition of the burner (DBI) and systems with pilot burner (IP) during ignition of the main burner.

3. Reliable Development: The gas regulator and ignition regulator are designed based on time-tested principles, which confirms their reliability and efficiency.

4. Simplified Installation: The installation of the ignition regulator on the gas regulator is simplified due to the presence of a special connector located at the top of the regulator.

5. Flexible Placement: The controller can be installed within a 90° angle in any direction from the vertical position of the two-position electric actuator, which gives greater flexibility in choosing the location and setting.

The Bosch 87083002120 Honeywell electronic board is mounted on boilers:

• ZW.
• ZS.
• OW 12-1, 23-1.