Honeywell M9494F1003 Modutrol actuator

Honeywell M9494F1003/B servomotors are 90 series proportional motors for valve control in HVAC systems. They operate from 24 V, are protected from the atmosphere, can be equipped with a transformer. They provide various time settings and have a cast magnesium case. Support accessories, including auxiliary switches and interface modules for upgrading.
Specifications:
– Gear transmission: 3600
– Running time: 60
– Number OF moves: 58361
– Number of steps: 364.76
– Speed: 911
– Torque: 300
Controller Type:
– The control scheme of the Honewell M9494F1003 actuator is a 90-by-135 ohm proportional controller. It can be used with the 90 series high/low limit regulator with a manual minimum position potentiometer (with a total resistance of up to 500 ohms).
Engine rotation:
– Normally closed. Closed position is the limit of rotation counterclockwise. The engine opens clockwise. They are delivered in the closed position.
Stroke:
– Models with fixed stroke (90° or 160°) and adjustable stroke in the field from 90° to 160°.
Load:
– Load by its own weight on the shaft: Drive or auxiliary end – no more than 200 pounds [90.8 kg]. The maximum total load is 300 pounds [136.2 kg].
Temperature range:
– Maximum temperature -150°F [66°C] at 25% duty cycle.
– Minimum – minus 40°F [-40°C].
Crankshaft:
– 3/8 inch square [9.5 mm].
Installation:
– Observe the safety and environmental conditions.
– Outdoor installation: Vertical position, sealed connectors, NEMA 3 standard.