Honeywell C7009A1009 flamerod holder

The Honeywell C7009A1009 infrared flicker detector is a compact device designed to ensure the safety of gas burners. Its compact dimensions allow it to be used in installations with limited space, such as gas or oil burners with gas ignition controlled by electronic flame protection systems.

Main Features:

• The Honeywell C7009A 1009 UV flame detector is designed to work with flame protection devices using the flame detection method through a rectifier.

• The Honeywell C7009 A 1009 UV cell is a smaller diameter flame extinguishing rod assembled with an external thread (1/8-27 NPT). basic and easily accessible Rajah electrical connection.

• The UV-sensitive detector C7009A1009U is produced using several flame extinguishing rods along the length, one end of which has a thread, and the others can be cut to the exact size. 

During installation, the following recommendations should be taken into account:

1. Select a place to install the device in such a way that the flame extinguisher controls a safe control flame that can quickly ignite the main flame.

2. Place the sensor so that it does not block the fire door.

3. Make sure that drafts do not affect the control flame.

4. It is preferable to install the rod vertically or at a downward angle to prevent deflection at high temperatures.

5. If the rod is mounted at an upward angle, additional support is required for rods longer than 12 inches.

6. When using the rod to control the gas regulator on the oil burner, ensure that the rod is sufficiently removed from the oil flame to avoid oil splashes on the rod.

7. A horizontal or inclined flame extinguisher should control the flame from the side to avoid false signals about the presence of a sufficient control flame to ignite the main burner.