Honeywell C7008A1034 flamerod holder

The Honeywell C7008A1034U flame detector is a compact device that effectively detects flames in confined spaces. They are used to check the flame in gas or oil burners with gas ignition, which are controlled by electronic flame protection systems.

The Resideo C7008A 1034B UV sensor is a miniature flame extinguisher assembly with a threaded base and a snap-on lid. It is also available without a lid and comes with flame arresters of various lengths.

The installation of these devices on the burner must be carried out with special attention to the location:

1. The location should provide control over the safe and rapid ignition of the main flame.

2. The devices must be placed in such a way as to avoid exposure to an open fire door.

3. The devices must be protected from the influence of drafts that may affect the control flame.

4. It is preferable to install the rod vertically or at a downward angle to prevent its deflection at high temperatures.

5. Rods longer than 12 inches require additional support if they are positioned horizontally or at an upward angle.

6. When using the rod to control the gas regulator on the oil burner, avoid oil splashes on the surface of the rod.

7. A horizontally or obliquely mounted rod must correctly perceive the control flame, otherwise there may be a false determination of its effectiveness for igniting the main flame.

These devices have been certified and can be used in accordance with the recommendations of the burner manufacturer or an industrial risk insurer.