Brahma 18049400 BT2310 control box

Brahma BT2310 18049400 oil burner control box are based on microcontroller technology, they are designed to control burners on gas, fuel oil or mixed fuel for non-permanent operation.

Devices of this type are equipped with a non-volatile lock, i.e. restarting from the lock state can only be carried out by manually restarting the device. These devices are suitable for equipping burners with single-stage or two-stage heating for various applications.

Brahma BT2310 18049400 gas control are suitable for use in accordance with EN 746-2, EN 676, EN 525, EN 1020 and EN 1319 standards or on oil fuel in accordance with Part 2 of DIN 4794 standard (edition of December 1980, relating to hot air generators, only in TW = 20 s and TS versions = 5 s).

Features

The main characteristics of this series are:

• Developed in accordance with the European Directive on Gas Appliances 2009/142/EC and 2006/42/EC;

• Developed in accordance with EN298:2003 (European Standard for automatic gas burner control systems), EN676:2003 (European Standard for automatic gas burners with forced draft), DIN 4788 (German standard for burners with fan) and EN230:2005 (European Standard for automatic burner control systems);

• Ability to connect remote lock and reset signals;

• Flame detection for BT gas appliances..G using the flame straightening property (using an electrode) or detecting ultraviolet radiation using FD/S BT or UV.. phototube photo sensors.

• Flame detection for BT..O oil appliances, yellow flame detection (visible light with FC type photocell.. or phototransistor type FT..) or blue flame (ultraviolet radiation with photodiode FD..D BT or UV.. phototube)

• Two independent safety contacts for actuating the valve;

• Maximum service life of electrical equipment declared load >250,000 operations;

• Without limitations of burner power (time and operating functions must correspond to the scope of application at the design stage of the device);

• Accurate and repeatable setup time.

• The ability to receive messages about the type of lock and operating status using a multi-colored LED located on the device board.

• Multiple ignition attempts. In standard mode, the blocking condition is met if no flame is detected after the safety time has elapsed.

• On request, using the Ynn option, you can set nn the number of reuse attempts before blocking.

Technical specifications

Operating temperature: -20 °C to +70°C

Storage temperature: -40°C to +85°C

Humidity: 95%

Degree of protection (with socket): IP40

Internal fuse: 6.3 A with delayed operation

External fuse (2): 5 A with delayed operation

Maximum total weight (with socket): about 270 g

Dimensions: 9×8.5×6.5 cm

The presence of a base: no

Pre-ventilation time (tv/tp): 10 sec

Safety time (ts): 10 sec

Power supply: 24 V