Brahma 18049001 GR1 control box

The Brahma GR1 18049001 burner controllers are designed for intermittent operation and are suitable for monoblock oil burners, washing machines, warm air generators, steam boilers and furnaces. Brahma GR1 18049001 relay provide efficient control of oil combustion in the burner and support automation in various applications. The Brahma GR1 18049001 control boxes comply with the DIN EN 13842:2004-10 standard for warm air generators, have two safety contacts for controlling the oil valve and can withstand more than 250,000 operations at maximum load. Features such as single flame mode, preheater installation option, built-in reset and external remote reset are also provided. Various flame sensors are supported to increase the reliability and safety of the system.

Technical data

– The resource of automation is more than 250 thousand cycles of switching on at maximum loads.

– Supply voltage: 220÷240 V∼ at 50/60 Hz; on request: 110÷120 V∼ at 50/60 Hz

– Operating temperature range: -20°C ÷ +60°C

– Ambient humidity: no more than 95% at 40°C

– Degree of protection: IP 40

Timings:

– Pre-purge time (TV): 10 s

– Safe Time (TS): 10 s

– Dropout time when the working flame is turned off: < 1 s

Power consumption:

– at a supply voltage of 220÷240 V AC: 8 VA

– at a supply voltage of 110÷120 V AC: 4 VA

Maximum cable length of external components:

– Thermostats (T – TC): 20 m

– Reset and alarm (RE – SB): 10m

– Everyone else: 1 m

Shutdown voltage:

– for supply voltage 220÷240 V AC: 85 V AC

– for 110÷120 V AC supply voltage: 45 V AC

– Internal fuse power: 6.3A with delay

– Power of the external fuse: 6.3 A with fast operation

– Weight (including socket): 132 g

– Operating temperature: -10 ÷ +60°C.

– Burner capacity – up to 30 kg/h.

– Continuous flame monitoring by FC11, FC13, FC14 or FC14L photodetector;

– Dimensions:8.5×6.9×6.5 cm

Construction

The unique design and the use of surface-mounted components make it possible to reduce the overall dimensions of the control panel. The plastic case provides protection against damage, such as collisions, careless opening, dust ingress, as well as contact with the external environment, providing additional strength and safety of the device.

The inclusion of a varistor in the design protects the control system from sudden voltage surges in the electrical network, which contributes to the stable and safe operation of the control unit. The built-in fuse provides additional protection for the internal relays of the control unit in the event of a short circuit at the outputs, such as valves, ignition transformer, engine and lock signal. These safety measures contribute to the reliable and long-term operation of the control system in various operating conditions.

Connection

To connect external components, the control unit can be equipped with an N-type connector equipped with a screw terminal block, which provides a simple and safe connection. It is recommended to use M4 type screws to attach the sockets. To attach the control element to the outlet, use the pin included in the control unit package.