Brahma 15930064 TCD2FA ignition transformer

BRAHMA TCD2FA 15930064 ignition transformers are small devices that are used in various types of burners (gas, liquid fuel) both at home and in industrial installations. They work on the basis of an electronic generator that creates a high-frequency voltage using a special transformer. This voltage reaches 17 kV. It is important to note that all these transformers comply with certain standards without the use of additional filters.

Specifications

• Built-in EMC filter;
• The dimensions allow you to replace most transformers from other manufacturers ;
• The dimensions correspond to the transformers of the TC and TD series manufactured by Brahma;
• High efficiency and ignition power;
• Low power consumption;
• Single or double-pin high voltage output;
• Various mounting and connecting systems;
• Built-in short circuit protection;
• In gas and liquid fuel burners, the safety of ignition transformers depends on the controller.

Permissions

BRAHMA TCD2FA 15930064 ignition units meet the requirements of the Low Voltage Directive (LVD) 2006/95/EC, as they have an IMQ resolution in accordance with EN 61558-1:2005+A1:2009 and EN 61558-2-3:2010 standards.

Technical information

Number of contacts: 2

Peak output voltage kV: 2*13

Rated output voltage kV: 2*4.5

mA Peak current: 62

Rated current mA: 30

Frequency of output voltage kHz (1): 10

Output voltage frequency kHz (2): 12

VA Energy Consumption: 29

Supply voltage: 230 V 50/60 Hz

Duty cycle: 33%

Operating temperature: -20 … +60 °C

Protection: IP 00

Recommended spark distance: 3-5 mm

Max. length of ignition cable: 1.5m

Weight: about 250 g.

Construction

These transformers operate on the principle of using a special electronic generator, which makes them compact and lightweight, but at the same time provides high ignition power. Their internal components are treated with a special material to protect against overheating during prolonged operation. Also, the built-in varistor protects the device from possible power surges.

Connections

BRAHMA TCD2FA 15930064 transformers with ignition cable can be supplied with different connectors for connection to the power cable. There can be a triangular SP1 connector or a 6.35×0 connector.8. The length and end of the cable can be changed according to your request.

There are two options for connecting a high voltage cable: a connector with a diameter of 4 mm or a threaded connection. You can also order different types of connectors, including connectors with an already connected cable, if necessary.