Brahma 15930060 TCD2FA ignition transformer

BRAHMA TCD2FA 15930060 ignition units are characterized by extremely compact overall dimensions. They are used in gas burners, burners for light and heavy types of liquid fuels in both domestic and commercial as well as industrial installations.

All BRAHMA TCD2FA 15930060 ignition transformers have a filter and comply with the requirements of Directive 2004/108/EC without the use of additional external filters.

Specifications

• Built-in EMC filter;
• The dimensions allow you to replace most transformers from other manufacturers;
• The dimensions correspond to the transformers of the TC and TD series manufactured by Brahma;
• High efficiency and ignition power;
• Low power consumption;
• Single or double-pin high voltage output;
• Various mounting and connecting systems;
• Built-in short circuit protection;
• In gas and liquid fuel burners, the safety of ignition transformers depends on the controller.

Technical information

Number of contacts: 2

Peak output voltage kV: 2*13

Rated output voltage kV: 2*4.5

mA Peak current: 62

Rated current mA: 30

Frequency of output voltage kHz (1): 10

Output voltage frequency kHz (2): 12

VA Energy Consumption: 29

Supply voltage: 230 V 50/60 Hz

Duty cycle: 33%

Operating temperature: -20 … +60 °C

Protection: IP 00

Recommended spark distance: 3-5 mm

Max. length of ignition cable: 1.5m

Weight: about 250 g.

Construction

1. The principle of operation with a high-frequency electronic generator:

– The basic principle of operation of the BRAHMA TCD2FA 15930060 ignition units is based on the use of a high-frequency electronic generator.

   – This principle allows you to create a device of compact dimensions and light weight.

2. Compact size and light weight:

– The use of a high-frequency electronic generator allows you to create a transformer with small dimensions and low weight.

3. High ignition power:

   – Despite its compact size, the transformer has a high ignition power, which makes it efficient to use.

4. Electronic circuit and spark transformer:

– An electronic circuit with a BRAHMA TCD2FA 15930060 transformer with a ferritic core is used.

   – The ferritic core is treated with a special composition with high thermal conductivity and a special expansion coefficient.

5. Protection against temperature fluctuations and overloads:

– A special compound applied to the ferritic core provides protection against temperature fluctuations and overloads resulting from prolonged operation of the device.

6. Built-in varistor:

– The device is equipped with a built-in varistor, which provides protection against possible voltage surges in the power supply network.

Connections

1. Power cable connector options:

   – BRAHMA TCD2FA 15930060 high voltage transformers offer a choice between a triangular connector SP1 and a connector 6.35×0.8 for connecting the power cable.

2. Flexible cable length and end parameters:

   – The length and end of the cable can be adapted according to individual customer requests.

3. High voltage cable connection options:

   – There are two options for connecting a high-voltage cable: connection with a connector with a diameter of ø4 mm or a threaded connection.

4.Flexibility in ordering connectors:

   – All types of connectors, including connectors with cable, are available on request, giving the customer the opportunity to choose the most suitable option for his specific needs.