Brahma 15911200 TC1LVCS ignition transformer

BRAHMA TC1LVCS 15911200 transformers with ignition cable are compact and are used in gas and liquid fuel burners for domestic, commercial and industrial installations. They operate on the basis of a high-frequency electronic generator, increasing the voltage using a high-voltage transformer with a ferritic core to 15 kV. They can be equipped with a filter to reduce electromagnetic interference, conforming to the standards of Directive 2004/108/EC, and have versions for continuous operation (50% duty cycle in 2 minutes).

Specifications

• The possibility of delivery with an integrated EMC filter;
• 100% duty cycle;
• Light weight and compact size;
• High efficiency and ignition power;
• Low power consumption;
• Single or double-pin high voltage output;
• Various mounting and connecting systems;
• Built-in short circuit protection;
• In gas and liquid fuel burners, the safety of ignition transformers depends on the controller.

Permissions

BRAHMA TC1LVCS 15911200 transformers meet the requirements of the Low Voltage Directive (LVD) 73/23/EEC, as they have an IMQ resolution in accordance with the standards EN 61558-1:1997 + A1:1998 + A11:2003 and EN 61558-2- 3:2000.

Technical information

Number of contacts: 1

Peak output voltage kV: 15

Peak current mA: 45

Frequency of output voltage kHz (1): 6

Frequency of output voltage kHz (2): 10

VA Energy Consumption: 25

Supply voltage: 220-240 V 50/60 Hz On request: 110-120 V 50/60 Hz

Duty cycle: 100 %

Operating temperature: -10 … +60 °C

Protection: IP00

Recommended electrode spacing (spark distance): 3-5 mm

Max. length of ignition cable: 1.5 m

Standard power cable length: 560mm

Weight: about 420 g.

Construction

The high-frequency electronic generator provides compact dimensions and light weight of BRAHMA TC1LVCS 15911200 ignition units with high ignition power. A specially treated ferritic transformer and an electronic circuit provide protection against temperature fluctuations, and an integrated varistor prevents damage from voltage surges. The transformers are available in various versions with different numbers of contacts, high voltage connections and an optional EMC filter.

Connections

1. BRAHMA TC1LVCS 15911200 ignition transformers are compatible with Brahma controllers and can be attached directly to the transformer using M4x45 screws.

2. Transformers can be supplied with a built-in power cable or with a connector for it, providing flexibility in installation.

3. The connection of the high-voltage cable is carried out inside the insulator and is available in two versions: threaded connection or connection with a connector ø4 mm. All connectors, including connectors with cable, are available on request.

Installation

• ATTENTION! HIGH VOLTAGE.
• Connect and disconnect the BRAHMA TC1LVCS 15911200 transformer only after the power is turned off.
• The installation is carried out in accordance with national and European standards (e.g. EN60355-1 / EN50165) for electrical safety.
• The installation must ensure that the valve body is connected to the ground to provide protection against electric shock (EN60335-1).
• The transformer is installed in any position.
• Do not place high-voltage cables next to other cables.
• Ensure the appropriate level of protection for this installation.