Brahma 15910680 TD1STCSF ignition transformer

The BRAHMA TD1STCSF 15910680 ignition units are characterized by extremely compact dimensions and are widely used in gas burners, as well as burners for light and heavy liquid fuels in home, commercial and industrial installations. They operate on the basis of a high-frequency electronic generator, where the voltage is increased by using a BRAHMA TD1STCSF 15910680 high-voltage transformer with a ferritic core, reaching output values up to 15 kV.

BRAHMA TD1STCSF transformer for Master 4110.609 В35CED, В70CED, B100CED, B150CED before 2011 air heaters.

All types of BRAHMA TD1STCSF 15910680 transformers with ignition cable can be equipped with a filter to reduce electromagnetic interference. In the presence of such a filter, the electronic transformers comply with the requirements of Directive 2004/108/EC, and no additional external filters are required. The BRAHMA TD1STCSF 15910680 transformers are also available in versions for continuous operation with a 50% duty cycle for 2 minutes.

Specifications

• Can be supplied with a built-in EMC filter to reduce electromagnetic interference;
• 100% duty cycle operation, ensuring continuous efficiency;
• Light weight and compact size for easy installation;
• High efficiency and ignition power, ensuring reliable and efficient burner start-up;
• Low power consumption, contributing to energy saving and resource saving;
• The ability to select a single or two-pin high voltage output, depending on the requirements of a particular application;
• Various mounting and connection system options to adapt to different configurations;
• Built-in short circuit protection, ensuring safe operation;
• In gas and liquid fuel burners, the safety of ignition transformers is controlled by a controller, ensuring reliable and safe operation.

Technical information

Number of contacts: 1

Peak output voltage kV: 15

Peak current mA: 45

Frequency of output voltage kHz (1): 6

Frequency of output voltage kHz (2): 10

VA Energy Consumption: 25

Ignition cable connectors: plug-in Ø4 mm

Supply voltage: 220-240 V 50/60 Hz On request: 110-120 V 50/60 Hz

Duty cycle: 100 %

Operating temperature: -10 … +60 °C

Protection: IP00

Recommended distance between electrodes (spark distance): 3÷5 mm

Max. length of ignition cable: 1.5 m

Standard power cable length: 560mm

Weight: about 360 g.

Construction

The use of a high-frequency electronic generator makes it possible to create compact devices with high ignition power, small size and light weight. The electronic circuit and transformer with a ferritic core are treated with a special compound that provides high thermal conductivity and protection against temperature fluctuations and overloads during prolonged operation. The built-in varistor protects the device from possible power surges in the power supply network. BRAHMA TD1STCSF 15910680 transformers are available in various configurations: with different number and location of contacts, different types of connections for high voltage and power cable options, with the possibility of installation with or without an integrated electromagnetic filter (EMC).

Connections

BRAHMA TD1STCSF 15910680 transformers are compatible with Brahma controllers, which can be mounted on a transformer using M4x45 screws. It is possible to supply transformers with both a built-in power cable and a connector for it. The connection of the high-voltage cable is carried out inside the insulator and can be made in two versions: a threaded connection or a connection with an ø4 mm connector. Various types of connectors, including cable options, can be ordered on request.