Brahma 15910679 TD1STCSF ignition transformer

BRAHMA TD1STCSF 15910679 ignition transformers are surprisingly compact in size and are used in various gas burners, as well as burners for light and heavy liquid fuels, both in domestic and commercial, as well as in industrial installations. Their principle of operation is based on the use of a high-frequency electronic generator, which increases the voltage using a high-voltage transformer BRAHMA TD1STCSF 15910679 with a ferritic core, reaching output values up to 15 kV.

All models of BRAHMA TD1STCSF 15910679 spark transformers can be equipped with a filter to reduce electromagnetic interference. At the same time, the electronic transformers comply with the requirements of Directive 2004/108/EC, and the use of additional external filters is not required. BRAHMA TD1STCSF 15910679 ignition units also offer versions for continuous operation with a 50% duty cycle for 2 minutes.

Specifications

• Can be supplied with a built-in EMC filter to reduce electromagnetic interference;
• 100% duty cycle operation, ensuring continuous efficiency;
• Light weight and compact size for easy installation;
• High efficiency and ignition power for efficient burner start-up;
• Low power consumption, contributing to energy saving;
• The ability to select a single or two-pin high voltage output, depending on the requirements;
• Various mounting and connection system options to adapt to different configurations;
• Built-in short circuit protection, ensuring safe use;
• In gas and liquid fuel burners, the safety of ignition transformers is controlled by a controller, which ensures reliable and safe operation.

Permissions

BRAHMA TD1STCSF 15910679 transformers fully comply with the requirements of the Low Voltage Directive (LVD) 73/23/EEC, which is confirmed by the presence of an IMQ permit in accordance with the standards EN 61558-1:1997 + A1:1998 + A11:2003 and EN 61558-2-3:2000. This ensures a high level of safety and compliance with regulations for low voltage operation, ensuring reliability and compliance with safety standards in the use of transformers in various environments and installations.

Technical information

Number of contacts: 1

Peak output voltage kV: 15

Peak current mA: 45

Frequency of output voltage kHz (1): 6

Frequency of output voltage kHz (2): 10

VA Energy Consumption: 25

Ignition cable connectors: plug-in Ø4 mm

Supply voltage: 220-240 V 50/60 Hz On request: 110-120 V 50/60 Hz

Duty cycle: 100 %

Operating temperature: -10 … +60 °C

Protection: IP00

Recommended distance between electrodes (spark distance): 3­-5 mm

Max. length of ignition cable: 1.5 m

Standard power cable length: 560mm

Weight: about 360 g.

Construction

The principle of operation, based on the use of a high-frequency electronic generator, made it possible to create a compact and lightweight device with high ignition power. The electronic circuit and the transformer with a ferritic core are treated with a special composition with high thermal conductivity and a special expansion coefficient, which provides protection against temperature fluctuations and overloads that occur during long-term operation. The built-in varistor protects the device from possible power surges in the power supply network.

BRAHMA TD1STCSF 15910679 transformers are available in various versions: with different number and position of contacts, different types of high voltage connections and power cable options. There are also options with and without an integrated electromagnetic filter (EMC), which provides flexibility in selection and use in various applications.