Brahma 15910400 TC1LVCAF ignition transformer

The BRAHMA TC1LVCAF 15910400 ignition transformers are characterized by extremely compact overall dimensions. They are used in gas burners, burners for light and heavy types of liquid fuels in both domestic and commercial as well as industrial installations.

The principle of operation is based on a high-frequency electronic generator; the voltage produced by it increases due to the use of a transformer with a ferritic core, reaching output values up to 15 kV.

All types of BRAHMA TC1LVCAF 15910400 transformers can be supplied with a filter to reduce electromagnetic interference. In this case, the electronic transformers comply with the requirements of Directive 2004/108/EC without the use of additional external filters.

BRAHMA TC1LVCAF 15910400 transformers also have versions for continuous operation (100% duty cycle).

Specifications

• The main characteristics of this series of transformers:
• Possibility of delivery with built-in EMC filter;
• Light weight and compact size;
• High efficiency and ignition power;
• Low power consumption;
• Single or double-pin high voltage output;
• Various mounting and connecting systems;
• Built-in short circuit protection;
• In gas and liquid fuel burners, the safety of ignition transformers depends on the controller.

Permissions

The BRAHMA TC1LVCAF 15910400 ignition devices meet the requirements of the Low Voltage Directive (LVD) 73/23/EEC, as they have an IMQ resolution in accordance with the standards EN 61558-1:1997 + A1:1998 +A11:2003 and EN 61558-2- 3:2000.

Technical data

Number of contacts: 1

Rated output voltage (kV): 15

Peak current (mA): 45

Rated current (mA): 20

Output voltage frequency (kHz) No.1: 6

Output voltage frequency (kHz) No.2: 10

Power consumption (VA): 45

Supply voltage: 220-240 V 50/60 Hz; On request: 110-120 V 50/60 Hz

Duty cycle: 50 %

Operating temperature: -10 … +60 °C

Protection: IP00

Recommended distance between electrodes (spark distance): 3-5mm

Max. length of ignition cable: 1.5 m

Standard power cable length: 560mm

Weight: about 420 g.

Construction

The principle of operation, based on the use of a high-frequency electronic generator, made it possible to create a device of compact dimensions and low weight, but with high ignition power. The electronic circuit and the transformer with a ferritic core are treated with a special compound with high thermal conductivity and a special expansion coefficient, which provides protection against temperature fluctuations and overloads caused by prolonged operation. The built-in varistor protects the device from possible power surges in the power supply network. BRAHMA TC1LVCAF 15910400 high voltage transformers are available in different versions: with different number and position of contacts, types of high voltage connections and power cable, with/without EMC (electromagnetic) filter.

Connections

BRAHMA TC1LVCAF 15910400 transformers can be used with Brahma controllers, which can be installed directly on the transformer using M4x45 screws. All BRAHMA TC1LVCAF 15910400 ignition transformers can be supplied with either a built-in power cable or a connector for it.

The connection of the high-voltage cable is carried out inside the insulator and is available in 2 versions: threaded connection, or connection with a connector ø4 mm. All connectors, including connectors with cable, are available on request.