Brahma 15909105 TR2/A ignition transformer

BRAHMA TR2/A 15909105 transformers are designed for gas devices, reducing electromagnetic interference. Their installation close to the ignition electrode reduces interference from the cable. A wide range of models allows you to choose the optimal solution for different installations.

Technical information

• Operating temperature: -20°C – +60°C
• Protection: IP00
• Recommended spark distance: 2-4 mm
• Max. ignition cable length: 1 m
• Weight 55 g.
• Output voltage: 15 kV
• Duration of ED(DU) operation: 100 %
• Power consumption: 2.5 VA
• Number of outputs: 1

Installation

• Connect and disconnect the transformer only after the power is turned off.
• The installation is carried out in accordance with national and European standards (e.g. EN 60355-1/EN 50165) on electrical safety.
• Ensure reliable grounding.
• The ignition transformer BRAHMA TR2/A 15909105 is installed in any position.
• Do not place high-voltage cables next to other cables.
• Ensure the appropriate level of protection for this installation.
• Reduce the length of the ignition cable as much as possible (this will reduce the parasitic capacity and the likelihood that the ignition cables will act as an antenna transmitting interference to nearby cables).
• Route the ignition cables as close as possible to the ground busbar to reduce the impact of interference on the remaining electrical wires.
• Arrange the grounding at one point, thereby preventing the creation of parasitic ring currents.