Brahma 15909032 TR2/A ignition transformer

Ignition transformers BRAHMA TR2/A 15909032 are designed for use in atmospheric gas burners installed in various heating devices such as wall-mounted boilers, water heaters, air heaters, convectors, floor boilers and other similar devices. Their role includes minimizing electromagnetic interference generated by the ignition transformer.

The ignition units BRAHMA TR2/A 15909032 are designed in such a way as to reduce electromagnetic interference generated by the ignition transformer, which is especially important when operating gas devices. The installation of BRAHMA TR2/A 15909032 transformers with ignition cable near the ignition electrode reduces the length of the ignition cable, which is the main source of interference.

The large selection of these transformers facilitates the selection of a suitable option for various types of installations. To ensure reliable operation of the BRAHMA TR2/A 15909032 transformer, a special electrical circuit with flame control and safety devices, including FC modules.., CM controllers, is required..FR and DMR.. DTMR… equipped with electromagnetic filters.

To further reduce the level of interference, if necessary, resistors are installed on the transformers. It is important to note that these transformers are protected by Italian patent No. 01289096, issued on 09/25/1998, which concerns the ignition device for flare burners with a reduced level of radio interference.

Technical information

Operating temperature: -20°C – +60°C

Protection: IP00

Recommended spark distance: 2-4mm

Max. length of ignition cable: 1 m

Weight 55 g.

Output voltage: 15 kV

Duration of ED(DU) operation: 100 %

Power consumption: 2.5 VA

Number of outputs: 1

Installation

1. Connection and disconnection:

– Connect and disconnect the transformer only after a complete power outage. This guarantees the safety of the process and prevents the risk of electric shock.

2. Installation according to standards:

– The installation must comply with national and European electrical safety standards such as EN 60355-1 and EN 50165. This ensures compliance with high quality and safety standards.

3. Grounding:

   – Ensure reliable grounding to ensure safety and reduce the risk of electrical damage.

4. Installation in any position:

– The ignition transformer BRAHMA TR2/A 15909032 can be installed in any position, which facilitates the installation process.

5. Insulation of high-voltage cables:

– Do not place high-voltage cables next to others to avoid possible interference and undesirable effects on neighboring conductors.

6. Shortening the length of the ignition cable:

   – Minimize the length of the ignition cable to reduce parasitic capacitance and the likelihood of interference.

7. Laying cables closer to the ground:

   – Route the ignition cables as close as possible to the ground busbar to reduce the impact of interference on other electrical wires.

8. Single-point grounding:

– Arrange the grounding at one point to prevent the creation of parasitic ring currents.

These measures should ensure the efficient and safe use of the ignition transformer in accordance with your requirements and standards.