Brahma 15177061 T13/M ignition transformer

SKU: 15177061, 246.820.060

Price on request

5 People watching this product now!

Ignition transformers BRAHMA T13/M 15177061 are designed for use in burners running on liquid or gaseous fuels. This indicates that these transformers are designed to provide ignition and flame maintenance in systems using various fuels, including liquids and gases.

Ignition transformers BRAHMA T13/M 15177061 are an important part of heating systems and industrial installations where efficient and reliable ignition is required to ensure proper operation of the burners. Their application can be in various fields, such as heating, industrial processes or other systems where flame maintenance on the burner is required.

Features

  • A variety of connection options and mounting methods;
  • Significant increase in discharge power (which makes them the optimal choice for applications requiring the use of long ignition wires);
  • High efficiency and power when operating the ignition system.

Technical data

– Supply voltage: 220 V – 50 Hz

– Operating temperature range: -10°C +35°C

– Insulation: polyester resin

– Recommended distance between electrodes: 3 – 5 mm

– Standard length of the power cable: 550 mm

– Number of poles: 1

– Output peak voltage (KV): 1 x 12

– Output effective voltage (KV): 1 x 8

– Output effective current (mA): 16

– Input effective current (A): 0.65

– Duty cycle: 100%

– Power consumption (VA): 145

– Weight (kg): 2

– Dust and moisture protection class: IP 00

– Ignition cable connectors: screw Ø2.5 mm

– Dimensions: 11×9.6×7.8 cm

Construction

The ignition device BRAHMA T13/M 15177061 has a magnetic circuit design in the form of a shell. The secondary windings of this transformer are grounded in the center. To suppress radio interference, the BRAHMA T13/M 15177061 high voltage transformer has a shield that must be securely grounded for efficient operation. Two caps painted with flame retardant paint cover the coils and combine with the magnetic circuit into a single unit.

Each transformer is designated by the letter T (denoting “transformer”), followed by a series of numbers indicating the model, and sometimes a letter of the alphabet defining a specific mounting system. If a standard mounting system is used, the corresponding letter is not mentioned in the part designation. For example, T11 refers to a transformer with a standard mounting system, while T11/N indicates a T11 transformer with a different mounting system.

The ignition devices BRAHMA T13/M 15177061 may have the same electrical characteristics, but differ in the mounting system or vice versa.

Connection

The BRAHMA T13/M 15177061 transformers use high-voltage insulators, which are divided into two types depending on the method of connection to high-voltage cables. The connection can be made using a screw, a cylindrical terminal with a diameter of 4 mm or a cylindrical terminal with a diameter of 6.3 mm. Unless explicitly stated, a screw terminal is used as the connecting terminal.

Spark transformers BRAHMA T13/M 15177061 are made of PBT material with a content of 30% fiberglass.

Installation

  • Attention! Dangerous voltage may be present.
  • Connect and disconnect the ignition transformer only after the power supply is completely disconnected.
  • Comply with applicable national and European standards (e.g. EN 60335-1 / EN 60335-2-102) on electrical safety.
  • Ensure that the transformer ground is securely connected to the electrical system ground.
  • Install a single grounding center, preventing the creation of ring tracks from the grounding wires.
  • The ability to install the device in any position.
  • Minimize the length of the ignition cable (to reduce parasitic capacitance and prevent the ignition cable from acting as an antenna that emits interference to adjacent cables).
  • Route the ignition cables along a separate path near the ground planes (to reduce interference to other electrical wires).
  • Avoid placing high voltage cables next to other cables.
  • Check that the degree of protection meets the requirements of the system.
Brand