Brahma 15096001 T11/MC ignition transformer

Ignition transformers BRAHMA T11/MC 15096001 are designed for use in burners running on liquid or gaseous fuels. This means that they can provide the necessary ignition and flame maintenance in systems using various types of fuels, including liquids and gases.

Features

• A variety of connection options and mounting methods;
• Significant increase in discharge power (which makes them the optimal choice for applications requiring the use of long ignition wires);
• High efficiency and power when operating the ignition system.

Technical data

– Supply voltage: 220 V – 50 Hz

– Operating temperature range: -10°C +35°C

– Insulation: polyester resin

– Recommended distance between electrodes: 3 – 5 mm

– Standard length of the power cable: 550 mm

– Number of poles: 1

– Output peak voltage (KV): 1 x 15

– Output effective voltage (KV): 1 x 9

– Output effective current (mA): 20

– Input effective current (A): 1.1

– Duty cycle: 33% in 3 minutes

– Power consumption (VA): 240

– Weight (kg): 3.5

– Dust and moisture protection class: IP 00

– Ignition cable connectors: screw Ø2.5 mm

– Dimensions: 10.1x8x8.2 cm

Construction

High-voltage insulators used in BRAHMA T11/MC 15096001 transformers can be of two types, depending on the method of connection to high-voltage cables:

1. Screw terminal:

– A screw is used to connect to high voltage cables.

   – This type of terminal must be used unless another type is explicitly specified.

2. Cylindrical terminal with a diameter of 4 mm:

– A cylindrical terminal with a diameter of 4 mm is used for connection to high-voltage cables.

3. Cylindrical terminal with a diameter of 6.3 mm:

   – A cylindrical terminal with a diameter of 6.3 mm is used for connection to high-voltage cables.

It is important to note that unless explicitly stated, the use of a screw terminal is assumed. The insulators are made of 30% PBT fiberglass, which provides them with good insulating properties and strength.

Connection

The high-voltage insulators used in BRAHMA T11/MC 15096001 transformers are an important element of the system, providing a safe and reliable connection to high-voltage cables. In this case, depending on the connection method, they come in two types:

1. Screw terminal:

– Used for connection to high-voltage cables using special screw connections.

   – Provides a strong and reliable connection where high-voltage cables are attached to the transformer using screws.

2. Cylindrical terminal with a diameter of 4 mm or 6.3 mm:

– Used for connection to high-voltage cables using a cylindrical terminal.

   – Depending on the specific requirements and settings, the terminal may have a diameter of 4 mm or 6.3 mm.

Insulator material:

   – Insulators are made of 30% PBT glass fiber (polybutylene terephthalate).

   – This material provides a high degree of insulation and resistance to high voltages.

The choice between these two types of insulators provides users with the flexibility to install and connect BRAHMA T11/MC 15096001 transformers according to specific requirements and preferences.