Brahma 13923205 EG12*L*GFD gas valve

Brahma EG12*L*GFD 13923205 gas control units are suitable for civil and industrial applications, are powered by alternating or direct current and are equipped with a mesh filter at the inlet, preventing dirt from entering with a thickness of more than 1 mm. Also, Brahma EG12*L*GFD 13923205 gas solenoid valves have a direct current supply coil, which allows you to perform actions as silently as possible.

Technical specifications

Class: A

Group: 2

Power supply voltage: 230 VAC / 50-60 Hz

Operating temperature: -10°C / +60°C

Closing time: 1 s

Opening time: 1 sec

Installation: vertical and horizontal

Body: die-cast aluminum

Core mounting: PG9

Gas flow: 7.5 m3/h

Working pressure: 250 mbar

Nozzle diameter: 15 mm

Weight: 900g

Consumption: 20 VA

Opening type: The valve opens slowly and silently (this version has a flow regulator)

Winding type: The power is supplied by alternating current, but the valve operates on direct current due to the built-in rectifier bridge

Connection type: Quick-on connection for DIN43650-IP65 plug (GFD IP40)

Installation options

It is possible to install a Brahma EG12*L*GFD 13923205 compact gas unit or a slow-opening valve (obtained using a special hydraulic shock absorber) with flow control and an initial flow of quick-opening adjustment plugs and pressure plugs at the inlet (all) or outlet (except for flow control plugs).

Flow adjustment

To adjust the gas supply, you need to unscrew one of the two screws used to secure the shut-off group and turn the entire group clockwise to reduce the supply, or in the opposite direction to increase it.

Adjusting the opening time

After removing the upper protection, turning it counterclockwise, it is necessary to press the adjusting screw; when rotating clockwise, the opening time increases, when rotating in the opposite direction, the opening time decreases.

Quick-release initial flow adjustment

After removing the upper guard by turning it counterclockwise, if you turn the nut clockwise, the initial release will be reduced; if you turn the same nut counterclockwise, the initial release will be increased.

Standards and certification

Brahma EG12*L*GFD 13923205 valves, conforming to the EN161 standard, have a CE type certificate (CE registration number 63AQ0626) in accordance with European Directives 90/396 and 93/68.

Installation

• Comply with applicable national and European standards, such as EN60335-1, regarding electrical safety.
• When installing the Brahma EG12*L*GFD 13923205 gas control block, position it so that the arrow on the housing indicates the direction of fuel flow.
• When mounting the valve to the mounting pipeline, avoid twisting the shell, use a hex key to install it into the valve body.
• Ensure that no foreign objects enter the body of the Brahma EG12*L*GFD 13923205 gas solenoid valve.
• Make sure that the maximum fuel inlet pressure never exceeds the value indicated on the label.
• maximum fuel inlet pressure never exceeds the value indicated on the label.