Brahma 13912201 EG12*SR*GMO gas valve

Brahma EG12*SR*GMO 13912201 gas solenoid valves are suitable for civil and industrial use and operate on alternating or direct current. The Brahma EG12*SR*GMO 13912201 compact gas units are equipped with an inlet mesh filter that prevents dirt from entering with a thickness of more than 1 mm, and are equipped with a silent DC coil. They can be installed with the function of fast or slow opening, with flow control and initial flow.

Technical specifications

Flow control: Flow control equipment

Class: A

Group: 2

Power supply voltage: 230 VAC / 50-60 Hz

Operating temperature: -10°C / +60°C

Closing time: 1 s

Opening time: 1 sec

Installation: vertical and horizontal

Body: die-cast aluminum

Core mounting: PG9

Gas flow: 7.5 m3/h

Working pressure: 500 mbar

Nozzle diameter: 15 mm

Weight: 800 g

Consumption: 20 VA

Type of opening: Fast, silent opening valve

Winding type: The power is supplied by alternating current, but the valve operates on direct current due to the built-in rectifier bridge

Connection type: Terminal block connection-IP40

Flow adjustment

The flow rate is adjusted after the lower protection is removed. Turn the guard counterclockwise and then turn the nut clockwise to reduce flow. To increase the flow rate, turn in the opposite direction.

Installation

When installing the Brahma EG12*SR*GMO 13912201 gas valve, electrical safety must be observed in accordance with applicable national and European standards such as EN60335-1. Place the Brahma EG12*SR*GMO 13912201 valve so that the arrow on its body indicates the direction of fuel flow, and avoid twisting the shell when mounting to the mounting pipeline. To install the Brahma EG12*SR*GMO 13912201 gas control unit in the housing, use a hex key. Make sure that no foreign objects have entered the gas valve body, and make sure that the maximum pressure at the fuel inlet does not exceed the value indicated on the label.