Brahma 13883501 EG12*AR*AFD gas valve

Brahma EG12*AR*AFD 13883501 gas solenoid  valves are widely used in both the civil and industrial sectors. They can operate with alternating or direct current and are equipped with a mesh filter at the inlet, preventing the penetration of dirt with a thickness of more than 1 mm.

Brahma EG12*AR*AFD 13883501 gas valves are equipped with a direct current supply coil, which ensures quiet operation. It is possible to install a valve with a quick-opening function or a slow-opening valve, the latter is regulated by a special hydraulic shock absorber. Adjustment plugs and pressure plugs can be installed both at the inlet (all) and at the outlet (with the exception of flow control plugs).

These Brahma EG12*AR*AFD 13883501 gas solenoid valves comply with the EN161 standard and have a CE type certificate (CE registration number 63AQ0626) in accordance with European Directives 90/396 and 93/68, which confirms their compliance with high safety standards.

Technical specifications

Class: A

Group: 2

Power supply voltage: 230 VAC / 50-60 Hz

Operating temperature: -10°C / +60°C

Closing time: 1 s

Opening time: 1 sec

Installation: vertical and horizontal

Body: die-cast aluminum

Core mounting: PG9

Gas flow: 7.5 m3/h

Working pressure: 500 mbar

Nozzle diameter: 15 mm

Weight: 800 g

Consumption: 20 VA

Type of opening: Quick-opening valve

Winding type: AC power supply

Connection type: Quick-start connection for DIN43650-IP65 plug (GFD IP40)

Flow control: Flow control equipment

Flow adjustment

The flow rate is adjusted after the lower protection is removed. Turn the guard counterclockwise and then turn the nut clockwise to reduce flow. To increase the flow rate, turn in the opposite direction.

Installation

When installing the Brahma EG12*AR*AFD 13883501 gas control block, electrical safety must be observed in accordance with applicable national and European standards such as EN60335-1. Place the Brahma EG12*AR*AFD 13883501 compact gas unit so that the arrow on its body indicates the direction of fuel flow, and avoid twisting the shell when mounting to the mounting pipeline. To install the Brahma EG12*AR*AFD 13883501 gas control block in the housing, use a hex key. Make sure that no foreign objects have entered the gas valve body, and make sure that the maximum pressure at the fuel inlet does not exceed the value indicated on the label.