Brahma 13767200 E6G*SR 8*3/8*GMO gas valve

Brahma E6G*SR8*3/8*GMO 13767200 gas solenoid valves are normally closed type devices. They are capable of operating on both direct and alternating current, and are divided into two groups with a nozzle diameter of 8 or 10 mm.

Application

Brahma E6G*SR8*3/8*GMO 13767200 gas control blocks are designed for use in domestic and industrial installations.

Technical specifications

– Valve class: A

– Supply voltage: 230 V / 50-60 Hz

– Operating temperature: -10°C / +60°C

– Closing time: 1 sec

– Opening time: 1 sec (for versions with fast opening)

– Installation: Vertical and horizontal

– Body Material: Brass

– Nozzle diameter: 8mm

– Weight: 700 g

– Consumption: 20 VA

– Natural gas consumption: 2 m3/h

– Power supply type: Alternating current, but the valve is controlled by a DC signal due to the built-in bridge rectifier circuit

– Connection type: Terminal block connection – IP54

– Opening type: Quick opening, silent

– Working pressure: 0-1000 mbar

Installation

• The installation must comply with national and European standards, such as EN 60335-1, ensuring electrical safety.
• Place the Brahma E6G*SR8*3/8*GMO 13767200 gas solenoid valve so that the arrow on the valve body coincides with the flow direction.
• When installing, avoid dislodging the protective shell and use an appropriately sized hex key.
• Make sure that no foreign objects have entered the valve.
• Check that the inlet pressure of the Brahma E6G*SR8*3/8*GMO 13767200 gas control unit does not exceed the set value on the valve.

Setting up the flow rate

Rotate clockwise to reduce gas flow, counterclockwise to increase gas flow through the Brahma E6G*SR8*3/8*GMO 13767200 gas valve.