Brahma 13192241 E7/L*A3C oil valve

Brahma E7/L*A3C 13192241 are electromagnetic devices designed to control the supply of light liquid fuels. These valves are of the normally closed type, have a quick response and can be used in both domestic and industrial installations. They operate on both direct and alternating current.

The products are available in various versions, which ensures ease of assembly and avoids the need to use a large number of fittings. This, in turn, helps to increase the reliability of the structure. Brahma E7/L*A3C 13192241 oil valves provide reliable fuel flow control, making them an important component for various systems requiring efficient liquid fuel management.

Technical information

Supply voltage: 230 V / 50 Hz

Working pressure: 0 – 20 bar (nozzle ø1.5 mm)

Ambient temperature: 0 – 60 °C

Maximum fuel temperature: 80 °C

Opening and closing time: <= 1 sec

Power Consumption: 11 VA

Consumption: 0.055 m3/h

Weight: 230 g

Installation position: any

Body: Brass

Input: G1/8”F

Output: G1/8”F

Winding type: Alternating current

Connection: three-core IP65 cable

Installation

When installing the Brahma E7/L*A3C 13192241 magnetic valve, the following recommendations should be followed:

1. Compliance with standards: The installation must comply with national and European electrical safety standards such as EN 60335-1.

2. Grounding: Ensure that the valve body is connected to the ground for effective protection against electric shock, according to EN 60335-1.

3. Flow direction: Install the valve so that the arrow on its body coincides with the direction of fuel flow.

4. Installation on the pipeline: When installing on the pipeline, avoid displacement of the protective shell and always use an appropriately sized hex key.

5. Prevention of foreign objects: Ensure that no foreign objects get inside the valve.

6. Using the filter: Connect the filter to the valve inlet, while the cell size of the filter element should not exceed 0.5 mm.

7. Grounding check: Make sure that the grounding is reliable to ensure safety

8. Pressure monitoring: Ensure that the pressure at the valve inlet does not exceed the value indicated on the valve itself.

Following these recommendations will help ensure the correct and safe installation of the Brahma E7/L*A3C 13192241 solenoid valve for effective control of the liquid fuel supply.

Checking at startup

When switching on for the first time, after repairs or when the system is idle for a long time, it is recommended to perform the following checks for the Brahma E7/L*A3C 13192241 oil valve:

1. Tightness of connections: Check the tightness of the pipeline connection and the valve inlet. Ensure that there are no fuel leaks, which can lead to unauthorized release and dangerous situations.

2. Check the opening and closing: Check the operation of the valve for opening and closing according to the signals coming to the valve coil. Make sure that the valve opens completely when a signal is received to ensure normal fuel flow, and closes securely after operation is completed.

3. Valve coil signals: Check that the signals supplied to the valve coil meet the requirements and ensure proper opening and closing control.

4. Visual inspection: Inspect the valve for visible damage, corrosion or other problems that may affect its performance.

5. Testing under controlled conditions: If necessary, test the valve under controlled conditions to ensure its reliable operation.

These steps will help ensure the correct functioning of the Brahma E7/L*A3C 13192241 magnetic valve after its installation, repair or long system downtime.