Brahma 13150501 E7/B*A3C oil valve

Electromagnetic valves for light types of liquid fuels Brahma E7/B*A3C 13150501 have a normally closed type, fast operation and operate on direct and alternating current. These Brahma E7/B*A3C 13150501 oil valves are available in various designs, which ensures ease of assembly and avoids the need to use a large number of fittings, thus increasing the reliability of the design.

Scope of application

Brahma E7/B*A3C 13150501 magnetic valves are used in domestic and industrial installations.

Technical information

Supply voltage: 230 V / 50 Hz

Working pressure: 0 – 20 bar (nozzle ø1.5 mm)

Ambient temperature: 0 – 60 °C

Maximum fuel temperature: 80 °C

Opening and closing time: <= 1 sec

Power Consumption: 11 VA

Consumption: 0.055 m3/h

Weight: 230 g

Installation position: any

Body: brass

Input: G1/4”M

Output: G1/4”M

Winding type: alternating current

Connection: three-core IP65 cable

Installation

• During installation, national and European standards, such as EN 60335-1, regarding electrical safety must be observed.
• Ensure that the housing of the Brahma E7/B*A3C 13150501 solenoid valve is grounded in accordance with the requirements of EN 60335-1 for reliable protection against electric shock.
• Install the valve so that the arrow on its body indicates the direction of flow.
• When installing the Brahma E7/B*A3C 13150501 oil on the pipeline, avoid dislodging the protective shell by using an appropriately sized hex wrench.
• Check that no foreign objects are inside the Brahma E7/B*A3C 13150501 magnetic valve.
• Connect the filter to the valve inlet, while the cell size of the filter element should not exceed 0.5 mm.
• Carefully check the grounding to ensure its reliability.
• Make sure that the pressure at the valve inlet does not exceed the pressure indicated on the valve itself.

Checking at startup

At the first start, after repairs or during prolonged downtime of the system, it is necessary to check the Brahma E7/B*A3C 13150501 solenoid valve. Special attention should be paid to the tightness of the pipeline connection and the valve inlet. It is also important to check the opening and closing of the valve in accordance with the incoming signals to the valve coil.